Industrial Ceiling Mount V3 for Juniper Mist Access Points
Product information "Industrial Ceiling Mount V3 for Juniper Mist Access Points"
Made in Hamburg/Germany
The Industrial Ceiling Mount V3 for Juniper Mist Access Points enables fast, low-tool and drill-free installation of Juniper Mist Access Points on industrial & grid ceilings, cable trays, ducts, ladder systems as well as suspended wire-mesh ceilings. The mount is simply hooked in place and secured with wing screws—the access point is then hooked into the mount and operated horizontally. This reduces installation effort and time significantly in industrial environments.
Details
Compatibility
– Supported Juniper Mist AP models: AP45, AP43, AP41, AP34 as well as newer generations
– Mounting targets: industrial & grid ceilings, cable trays, ducts, ladder systems, suspended mesh ceilings and similar structures
Mechanics & Dimensions
– Mounting principle: hook in the mount and then tighten using wing screws.
– Installation orientation: horizontal (AP is hooked into the mount).
– Drilling: not required.
Material & Finish
– 1 mm zinc-plated steel, powder-coated; standard color white (RAL 9010).
– Other colors available on request after consultation.
These material and color specifications match our other indoor mounts and ensure a consistent visual appearance.
Installation & Use
– Fast installation by hooking in and securing with wing screws—ideal for retrofit and industrial environments.
– Application: indoor use
– No drilling required; resulting in minimal impact on existing ceiling/tray systems.
Advantages at a Glance
- Drill-free installation – hook in & secure with wing screws reduces effort and installation time
- Industrial-grade – suitable for grid ceilings, cable trays/ducts/ladders and mesh ceilings
- Clean horizontal installation – AP is hooked into the mount
- Durable powder coating – scratch- and impact-resistant; standard color RAL 9010
- Wide Juniper Mist compatibility – supports numerous AP models
Technical Overview
| Feature | Description |
|---|---|
| Product | Industrial Ceiling Mount Version 3 for Juniper Mist Access Points (CM-IND-JM-3) |
| Category / Purpose | Mount for fast, drill-free horizontal installation on industrial/grid ceilings, cable trays, ducts, ladder systems, suspended mesh ceilings |
| Compatibility | Juniper Mist: AP45, AP43, AP41, AP34 |
| Mounting principle | Hook in the mount, secure using wing screws; AP is hooked in |
| Material / finish | Fully powder-coated, scratch- & impact-resistant; standard: white (RAL 9010); other colors on request |
| Installation | Drill-free; suitable for industrial/grid ceilings, cable trays and mesh ceilings |
| Scope of delivery | 1× mount (CM-IND-JM-3), 2× M5 wing screw; APs not included |
| Use case | Indoor |
Conclusion
The Industrial Ceiling Mount is the fast, drill-free solution for horizontal installation of Juniper Mist Access Points on typical industrial structures. Thanks to its hook-in design and wing-screw fixation, installation is quick and secure; the robust RAL 9010 powder coating ensures long-lasting durability. Its broad compatibility with widely used Juniper Mist AP models makes the mount highly versatile across projects.
Scope of Delivery
– 1× Mount (CM-IND-JM-3)
– 2× M5 wing screw
– Access Points shown are not included.