Hook-in mounts

Made in Hamburg/Germany The Industrial Ceiling Mount V3 for Cisco Access Points enables fast, low-tool and drill-free installation of Cisco Access Points on industrial & grid ceilings, cable trays, ducts, ladder systems as well as suspended wire-mesh ceilings. The mount is simply hooked into place and secured with wing screws—the access point is then hooked into the mount and operated horizontally. This significantly reduces installation time and effort in industrial environments. Details Compatibility – Supported Cisco AP series: from AP1040 (approx. 2009). – Mounting targets: industrial & grid ceilings, cable trays, ducts, ladder systems, suspended mesh ceilings. – Not compatible with Cisco Meraki. Mechanics & Dimensions – Mounting principle: hook the mount into place, then tighten using wing screws. – Installation orientation: horizontal (AP is hooked into the mount). Material & Finish – 1 mm zinc-plated steel, powder-coated; standard color white (RAL 9010). – Other colors available on request after consultation. These material and color specifications match our other mounts and ensure a consistent appearance. Installation & Use – Fast installation by hooking in and securing with wing screws—ideal for retrofit and industrial environments. – Application: indoor use – No drilling required, resulting in a minimal impact on existing ceiling/tray systems. Advantages at a Glance Drill-free installation – hook in & secure with wing screws reduces effort and installation time Industrial-grade – suitable for grid ceilings, cable trays/ducts/ladders and mesh ceilings Clean horizontal installation – AP is hooked into the mount Durable powder-coated surface – scratch- and impact-resistant; standard color RAL 9010 Broad Cisco compatibility – supports numerous AP series Technical Overview Feature Description Product Industrial Ceiling Mount for Cisco Access Points Version 3 (CM-IND-C-3) Category / Purpose Mount for fast, drill-free horizontal installation on industrial/grid ceilings, cable trays, ducts, ladders, suspended mesh ceilings Compatibility Cisco series: from AP1040 (approx. 2009) Mounting principle Hook in the mount, secure using wing screws; AP is hooked in Adjustment Fixed position (no adjustable range after tightening) Material / finish Fully powder-coated, scratch- and impact-resistant; standard: white (RAL 9010); other colors on request Installation Drill-free; suitable for industrial/grid ceilings, cable trays, mesh ceilings Scope of delivery 1× mount (CM-IND-C-3), 2× M5 wing screw; APs not included Use case Indoor Conclusion The Industrial Ceiling Mount V3 for Cisco Access Points is the fast, drill-free solution for horizontal installation of Cisco Access Points on common industrial structures. Thanks to its hook-in design and wing-screw fixation, installation is quick and secure; the robust RAL 9010 powder coating ensures long-lasting durability. Its broad compatibility with widely used Cisco AP series makes the mount highly versatile across projects. Scope of Delivery – 1× Mount (CM-IND-C-3) – 2× M5 wing screw – Access Points shown are not included. Downloads Datenblatt (DE)   datasheet (EN)

Made in Hamburg/Germany The Industrial Ceiling Mount V3 for Juniper Mist Access Points enables fast, low-tool and drill-free installation of Juniper Mist Access Points on industrial & grid ceilings, cable trays, ducts, ladder systems as well as suspended wire-mesh ceilings. The mount is simply hooked in place and secured with wing screws—the access point is then hooked into the mount and operated horizontally. This reduces installation effort and time significantly in industrial environments. Details Compatibility – Supported Juniper Mist AP models: AP45, AP43, AP41, AP34 as well as newer generations – Mounting targets: industrial & grid ceilings, cable trays, ducts, ladder systems, suspended mesh ceilings and similar structures Mechanics & Dimensions – Mounting principle: hook in the mount and then tighten using wing screws. – Installation orientation: horizontal (AP is hooked into the mount). – Drilling: not required. Material & Finish – 1 mm zinc-plated steel, powder-coated; standard color white (RAL 9010). – Other colors available on request after consultation. These material and color specifications match our other indoor mounts and ensure a consistent visual appearance. Installation & Use – Fast installation by hooking in and securing with wing screws—ideal for retrofit and industrial environments. – Application: indoor use – No drilling required; resulting in minimal impact on existing ceiling/tray systems. Advantages at a Glance Drill-free installation – hook in & secure with wing screws reduces effort and installation time Industrial-grade – suitable for grid ceilings, cable trays/ducts/ladders and mesh ceilings Clean horizontal installation – AP is hooked into the mount Durable powder coating – scratch- and impact-resistant; standard color RAL 9010 Wide Juniper Mist compatibility – supports numerous AP models Technical Overview Feature Description Product Industrial Ceiling Mount Version 3 for Juniper Mist Access Points (CM-IND-JM-3) Category / Purpose Mount for fast, drill-free horizontal installation on industrial/grid ceilings, cable trays, ducts, ladder systems, suspended mesh ceilings Compatibility Juniper Mist: AP45, AP43, AP41, AP34 Mounting principle Hook in the mount, secure using wing screws; AP is hooked in Material / finish Fully powder-coated, scratch- & impact-resistant; standard: white (RAL 9010); other colors on request Installation Drill-free; suitable for industrial/grid ceilings, cable trays and mesh ceilings Scope of delivery 1× mount (CM-IND-JM-3), 2× M5 wing screw; APs not included Use case Indoor Conclusion The Industrial Ceiling Mount is the fast, drill-free solution for horizontal installation of Juniper Mist Access Points on typical industrial structures. Thanks to its hook-in design and wing-screw fixation, installation is quick and secure; the robust RAL 9010 powder coating ensures long-lasting durability. Its broad compatibility with widely used Juniper Mist AP models makes the mount highly versatile across projects. Scope of Delivery – 1× Mount (CM-IND-JM-3) – 2× M5 wing screw – Access Points shown are not included. Downloads Datenblatt (DE)   datasheet (EN)

Made in Hamburg/Germany The Industrial Ceiling Mount Version 3 for Aruba Access Points enables fast, low-tool and drill-free installation of Aruba Access Points on industrial & grid ceilings, cable trays, ducts, ladders as well as suspended wire-mesh ceilings. The mount is simply hooked in place and secured with wing screws—the access point is then hooked into the mount and operated horizontally. This significantly reduces installation time and effort in industrial environments. Details Compatibility – Supported Aruba AP series: 500 series, 600 series, 700 series – Mounting targets: industrial & grid ceilings, cable trays, ducts, ladder systems, suspended mesh ceilings, and similar structures Mechanics & Dimensions – Mounting principle: hook in the mount, then secure using wing screws. – Installation orientation: horizontal (AP is hooked into the mount). – Drilling: not required. Material & Finish – 1 mm zinc-plated steel, powder-coated; standard color white (RAL 9010). – Other colors available on request after consultation. These material and color specifications match our other indoor mounts to ensure a uniform appearance. Installation & Use – Fast installation by hooking in and securing with wing screws—ideal for retrofits and industrial environments. – Application: indoor use – No drilling required; therefore minimal impact on existing ceiling/tray structures. Advantages at a Glance Drill-free installation – hook in & secure with wing screws, reducing effort and installation time Industrial-grade – suitable for grid ceilings, cable trays/ducts/ladders and mesh ceilings Clean horizontal installation – AP is hooked into the mount Durable powder coating – scratch- and impact-resistant; standard color RAL 9010 Wide Aruba compatibility – supports multiple AP series Technical Overview Feature Description Product Industrial Ceiling Mount Version 3 for Aruba Access Points (CM-IND-A-3) Category / Purpose Mount for fast, drill-free horizontal installation on industrial/grid ceilings, cable trays, ducts, ladders, suspended mesh ceilings Compatibility 500 series, 600 series, 700 series Mounting principle Hook in the mount, secure with wing screws; hook in AP Material / finish Fully powder-coated, scratch- & impact-resistant; standard: white (RAL 9010); other colors on request Installation Drill-free; suitable for industrial/grid ceilings, cable trays and mesh ceilings Scope of delivery 1× mount (CM-IND-A-3), 2× M5 wing screw; APs not included Use case Indoor use Conclusion The Industrial Ceiling Mount Version 3 is the fast, drill-free solution for horizontal installation of Aruba Access Points on common industrial infrastructures. Thanks to its hook-in principle and wing-screw fixing, installation is quick and secure; the durable RAL 9010 powder coating ensures long-term robustness. Its broad compatibility with popular Aruba AP series makes this mount highly versatile across projects. Scope of Delivery – 1× Mount (CM-IND-A-3) – 2× M5 wing screw – Access Points shown are not included. Downloads Datenblatt (DE)   datasheet (EN)

Made in Hamburg/Germany The Industrial Ceiling Mount Version 2 for Aruba Access Points enables fast, low-tool and drill-free installation of Aruba Access Points on industrial & grid ceilings, cable trays, ducts, ladders as well as suspended wire-mesh ceilings. The mount is simply hooked into place and secured with wing screws—the access point is then hooked into the mount and operated horizontally. This reduces installation effort and time in industrial environments. Details Compatibility – Supported Aruba AP series: 500 series, 600 series, 700 series – Mounting targets: industrial & grid ceilings, cable trays, ducts, ladder systems, suspended mesh ceilings and similar structures Mechanics & Dimensions – Mounting principle: hook in the mount, then tighten using wing screws. – Installation orientation: horizontal (AP is hooked into the mount). – Drilling: not required. Material & Finish – 1 mm zinc-plated steel, powder-coated; standard color white (RAL 9010). – Other colors available on request after consultation. These material and color specifications match our other indoor mounts and ensure a uniform appearance. Installation & Use – Fast installation by hooking in and securing with wing screws—ideal for retrofit and industrial environments. – Application: indoor use – No drilling required—resulting in minimal impact on existing ceiling/tray systems. Advantages at a Glance Drill-free installation – hook in & secure with wing screws reduces effort and installation time Industrial-grade – suitable for grid ceilings, cable trays/ducts/ladders and mesh ceilings Clean horizontal installation – AP is hooked into the mount Durable surface – powder coating is scratch- and impact-resistant; standard color RAL 9010 Wide Aruba compatibility – supports multiple AP series Technical Overview Feature Description Product Industrial Ceiling Mount Version 2 for Aruba Access Points (CM-IND-A-2) Category / Purpose Mount for fast, drill-free horizontal installation on industrial/grid ceilings, cable trays, ducts, ladder systems, suspended mesh ceilings Compatibility 500 series, 600 series, 700 series Mounting principle Hook in the mount, secure using wing screws; AP is hooked in Material / finish Fully powder-coated, scratch- and impact-resistant; standard: white (RAL 9010); other colors on request Installation Drill-free; suitable for industrial/grid ceilings, cable trays and mesh ceilings Scope of delivery 1× mount (CM-IND-A-2), 2× M5 wing screw; APs not included Use case Indoor Conclusion The Industrial Ceiling Mount Version 2 is the fast, drill-free solution for horizontal installation of Aruba Access Points on common industrial structures. The hook-in mounting principle and wing-screw fixation make installation quick and secure; the robust RAL 9010 powder coating ensures long-lasting durability. Its broad compatibility with popular Aruba AP series makes the mount highly versatile for project work. Scope of Delivery – 1× mount (CM-IND-A-2) – 2× M5 wing screw – Access Points shown are not included.