Mounts by type

Made in Hamburg/Germany The combined mount for Aruba Access Points and patch antennas enables space-saving installation of Aruba Access Points with external patch antennas on walls or ceilings. The antenna is attached to the front section and – together with the front – can be tilted approx. ±15° to ±30° up or down depending on the access point in use. This saves both space and installation time, as only one mount is required for both AP and antenna. Material and color match our other indoor mounts: 1 mm zinc-plated steel, powder-coated, standard color white (RAL 9010); additional colors available upon request. The Aruba Access Point is connected to the mount using the included Arubadaptor. Cable management remains unobstructed: all edges are deburred to protect cables. For wall or ceiling installation, up to six screw points are available; typically, three screws provide sufficient support. Details Compatibility – Supported Aruba AP series: 500, 600, 700. – Supported patch antennas: AP-ANT-25A, AP-ANT-28, AP-ANT-35A, AP-ANT-38, AP-ANT-45, AP-ANT-48 as well as newer antennas with identical mounting hole dimensions. – AP attachment is done using the Arubadaptor (included). Mechanics & Dimensions – Dimensions of the mount: W 290 mm × H 280 mm × D 121 mm. – Note: Height and depth vary depending on the tilt angle and AP model. – Tilt range (front/antenna): depending on AP, approx. ±15° to ±30°. – Mounting points: wall/ceiling with up to 6 screws; typically 3 screws are sufficient. – Cable management: unobstructed; deburred edges protect cables. Material & Finish – 1 mm zinc-plated steel, powder-coated. – Standard color white (RAL 9010); other colors available on request. These material and color specifications match our other mounts for a consistent visual appearance. Installation & Use – Installation on walls or ceilings; the front section with antenna is tiltable (see tilt range). – Designed for indoor use. Important Notes – Before installation, verify the AP series and mounting hole dimensions of the patch antenna. – Use the Arubadaptor to connect the AP to the mount. Advantages at a Glance Combined installation of Aruba AP and patch antenna – saves space and installation time Tiltable front with antenna: depending on AP approx. ±15° to ±30° Clean cable management thanks to deburred edges Stable wall/ceiling installation (up to 6 screws; typically 3 are sufficient) 1 mm zinc-plated steel, powder-coated; standard color RAL 9010, other colors on request Technical Overview Feature Description Note Ensure antenna compatibility via mounting hole dimensions; AP installation requires the included Arubadaptor. Product Combined mount for Aruba Access Points and patch antennas (CM-APANT-A-3) Compatible AP series Aruba 500, 600, 700 series Compatible antennas AP-ANT-25A, AP-ANT-28, AP-ANT-35A, AP-ANT-38, AP-ANT-45, AP-ANT-48 and newer models with identical mounting hole dimensions Dimensions (mount) W 290 mm × H 280 mm × D 121 mm (H/D depend on tilt angle & AP) Tilt range (front) Depending on AP approx. ±15° to ±30° Material / finish 1 mm zinc-plated steel, powder-coated; standard color white (RAL 9010), other colors on request Installation Wall/ceiling; up to 6 screws, typically 3 screws sufficient Cable management Unobstructed; deburred edges protect cables AP attachment Using the included Arubadaptor Use case Indoor use (according to AP/antenna approvals) Scope of delivery Front & rear mounts (CM-APANT-A-3), 2× M6 screws, 2× wing screws, 4× M4 screws for antenna, Arubadaptor Conclusion The combined mount for Aruba consolidates AP and patch antenna installation into a single solution, saving space and time while offering flexible alignment thanks to the tiltable front. With clearly defined compatibility, the included Arubadaptor and a robust RAL 9010 finish, it provides a precise, practical indoor mounting solution. Scope of Delivery – Front mount (CM-APANT-A-3) – Rear mount (CM-APANT-A-3) – 2× M6 screw – 2× wing screw for fixing – 4× M4 screw for antenna installation – Arubadaptor Downloads Datenblatt (DE)   datasheet (EN)

Made in Hamburg/Germany The combined mount for Cisco Access Points and patch antennas enables space-saving installation of Cisco Access Points with external patch antennas on walls or ceilings. The antenna is attached to the front of the mount and – together with the front section – can be tilted approx. ±15° to ±30° up or down depending on the access point in use. This saves space and installation time, as only a single mount is required for both AP and antenna. Material and color match our wall mounts: 1 mm zinc-plated steel, powder-coated, standard color white (RAL 9010); other colors are available upon request. Details Compatibility – Supported Cisco AP series: from AP1040 (approx. 2009). – Antenna: Cisco AIR-ANT2566P4W-R and antennas with identical mounting hole dimensions. – Not compatible with Cisco Meraki. Mechanics & Dimensions – Dimensions of the mount: W 290 mm × H 265.5 mm × D 120 mm. – Note: height and depth may vary depending on angle and AP model. – Tilt (front/antenna): depending on AP approx. ±15° to ±30°. – Mounting points: wall/ceiling installation with up to 6 screws; typically 3 screws provide secure support (see image). – Cable management: not obstructed; all edges are deburred and therefore cable-friendly. Material & Finish – 1 mm zinc-plated steel, powder-coated; standard color white (RAL 9010). – Other colors are available on request after prior consultation. These material and color specifications match our other mounts and ensure a consistent appearance. Installation & Use – Installation on walls or ceilings; front section with antenna is tiltable (see tilt range). – The mount is designed for indoor use (according to the approved APs/antennas used). Important Notes – Before installation, verify the AP series and the mounting hole dimensions of the patch antenna used. – Cisco Meraki is not supported. – For color options other than RAL 9010, please contact us in advance by e-mail. Advantages at a Glance Combined installation for Cisco AP and patch antenna – saves space and installation time Tiltable front with antenna: depending on AP approx. ±15° to ±30° Clean cable management thanks to deburred edges Stable wall/ceiling installation (up to 6 screws; typically 3 are sufficient) 1 mm zinc-plated steel, powder-coated, standard color RAL 9010, other colors on request Technical Overview Feature Description Note Ensure antenna compatibility via mounting hole dimensions; Meraki models are excluded. Product Combined mount for Cisco Access Points and patch antenna (CM-APANT-C-3) Compatible APs Cisco from AP1040 (approx. 2009) Compatible antennas Cisco AIR-ANT2566P4W-R and antennas with identical mounting hole dimensions Incompatibility Not compatible with Cisco Meraki Dimensions (mount) W 290 mm × H 265.5 mm × D 120 mm (H/D depending on angle & AP) Tilt range (front) Depending on AP approx. ±15° to ±30° Material / finish 1 mm zinc-plated steel, powder-coated; standard color white (RAL 9010) Color options Other colors available after prior consultation Installation Wall/ceiling; up to 6 screws possible, typically 3 screws sufficient Cable management Unobstructed; deburred edges protect cables Scope of delivery Front and rear mounts (CM-APANT-C-3), 2× M6 screws, 2× wing screws, 4× M4 antenna screws Use case Indoor use (according to approved APs/antennas) Conclusion The combined mount consolidates AP and patch antenna installation into a single solution, saving space and time while offering flexible alignment via the tiltable front. With clearly defined compatibility and a robust RAL 9010 finish, it is a precise, practical indoor mounting solution. Scope of Delivery Front mount (CM-APANT-C-3) Rear mount (CM-APANT-C-3) 2× M6 screw 2× wing screw for fixing 4× M4 screw for antenna installation Downloads Datenblatt (DE)   datasheet (EN)

Made in Hamburg/Germany The Horizontal Wall Mount V3 for Aruba Access Points is the precise mounting solution for horizontal wall installation of Aruba Enterprise APs. The redesigned V3 architecture enables fast, secure installation and provides a clean, professional appearance in offices, schools, hotels and industrial environments. Details With the CM-WALL-A-3, your Aruba Access Point can be mounted flat and horizontally on the wall. This preserves the antenna characteristics and ensures predictable, reproducible RF coverage. The robust powder-coated metal construction is designed for continuous use and allows quick device replacement without special tools. Benefits & Features Version 3: precise AP seating for a fast and secure fit Horizontal wall mounting for consistent Wi-Fi performance Stable metal construction (powder-coated) – shock- and scratch-resistant Quick installation: mount the hardware, insert the access point Clean appearance for visible and public areas Compatibility Aruba Enterprise Access Points: compatible with the 500, 600 and 700 series Use Cases Wi-Fi installations in offices, healthcare, education, hospitality, and more Retrofit projects and conversions to horizontal wall mounting Uniform appearance in representative environments Technical Notes Mounting type: horizontal wall mount Material: metal, powder-coated Color: white (RAL 9010); other colors available on request With the CM-WALL-A-3, Aruba Access Points can be installed securely, quickly and with a professional look—ideal for new and existing installations of the 500, 600 and 700 series. Scope of Delivery Lower mount (CM-WALL-A-3) Upper cover mount (CM-WALL-A-3) Downloads Datenblatt (DE)   datasheet (EN)

Made in Hamburg/Germany The Horizontal Wall Mount V3 for Cisco Access Points is a robust, precisely engineered solution for horizontal wall installation of enterprise access points. The revised V3 design uses an accurate mounting pattern for fast, secure installation while providing a clean, professional appearance in offices, schools, hotels and industrial environments. The improved Version 3 mount features precisely positioned mounting holes that match Cisco’s original layout exactly. This alignment enables effortless installation, as the mount fits seamlessly into existing mounting points. Because of this compatibility, the mount can be swapped in place of the original hardware without additional adjustments. This saves installation time and cost when replacing existing mounts. Details The mount allows flat, horizontally oriented wall installation of the access point. This preserves the antenna characteristics and ensures predictable, reproducible RF coverage. Its solid, powder-coated metal chassis is built for long-term use and supports fast device replacement without special tools. Benefits & Features Version 3: optimized, precise mounting pattern for enterprise APs Horizontal wall installation for predictable RF coverage Durable metal construction (powder-coated) for continuous operation Fast installation: mount the base, insert the AP, close the cover Clean appearance – ideal for visible and public areas Compatibility Cisco (excluding Meraki): compatible with all current and past Cisco Enterprise Access Points using the standard mounting pattern (including older series such as 3800/3700/3600/3500/2800/2700/2600/1600/1260/1140/1040 as well as newer generations). Juniper / Mist: compatible with current and previous Mist Access Points using the matching hole pattern (e.g. AP34, AP41, AP43, AP45 and newer models). Aruba: compatible with the 500, 600 and 700 series when used with the Arubadaptor V2 or Arubadaptor QC. Note: Meraki models are not compatible. Use Cases Wi-Fi installations in offices, hospitals, schools, hotels and more Upgrades and conversions to horizontal wall mounting Uniform appearance in visible and representative areas Technical Notes Mounting type: horizontal wall mount Material: metal, powder-coated Color: white (RAL 9010); additional colors available on request With the CM-WALL-C-3, you are choosing a durable, installation-friendly mount that positions enterprise access points securely and elegantly on the wall—compatible with Cisco (excluding Meraki), Juniper/Mist, and with adapter support also for Aruba. Scope of Delivery Lower mount (CM-WALL-C-3) Upper cover mount (CM-WALL-C-3) Downloads Datenblatt (DE)   datasheet (EN)

Made in Hamburg/Germany The Horizontal Wall Mount V3 for Juniper / Mist Access Points is a robust, precisely engineered solution for horizontal wall installation of enterprise access points. The updated V3 design uses an accurate mounting pattern for fast, secure installation while providing a clean, professional appearance in offices, schools, hotels and industrial environments. Details The mount enables flat, horizontally oriented installation of the access point on the wall. This preserves antenna characteristics and ensures predictable and reproducible RF coverage. Its sturdy, powder-coated metal chassis is built for long-term use and supports quick device replacement without special tools. Benefits & Features Version 3: optimized, precise mounting pattern for enterprise APs Horizontal wall installation for predictable RF coverage Durable metal construction (powder-coated) for continuous operation Fast installation: mount the hardware, insert the AP, close the cover Clean appearance – ideal for visible areas Compatibility Juniper / Mist: compatible with current and earlier Mist Access Points using the matching hole pattern (e.g. AP34, AP41, AP43, AP45 and newer models). Cisco (excluding Meraki): compatible with all current and past Cisco Enterprise Access Points using the standard mounting pattern (including older series such as 3800/3700/3600/3500/2800/2700/2600/1600/1260/1140/1040 and newer generations). Aruba: compatible with the 500, 600 and 700 series when used with the Arubadaptor V2 or Arubadaptor QC. Note: Meraki models are not compatible. Use Cases Wi-Fi installations in offices, hospitals, schools, hotels and more Upgrades and conversions to horizontal wall mounting Uniform appearance in visible and representative environments Technical Notes Mounting type: horizontal wall mount Material: metal, powder-coated Color: white (RAL 9010); additional colors available on request With the CM-WALL-JM-3, you are choosing a durable, installation-friendly mount that places enterprise access points securely and elegantly on the wall—compatible with Cisco (excluding Meraki), Juniper/Mist, and with adapter support also for Aruba. Scope of Delivery Lower mount (CM-WALL-JM-3) Upper cover mount (CM-WALL-JM-3) Downloads Datenblatt (DE)   datasheet (EN)

Made in Hamburg/Germany The Industrial Ceiling Mount V3 for Cisco Access Points enables fast, low-tool and drill-free installation of Cisco Access Points on industrial & grid ceilings, cable trays, ducts, ladder systems as well as suspended wire-mesh ceilings. The mount is simply hooked into place and secured with wing screws—the access point is then hooked into the mount and operated horizontally. This significantly reduces installation time and effort in industrial environments. Details Compatibility – Supported Cisco AP series: from AP1040 (approx. 2009). – Mounting targets: industrial & grid ceilings, cable trays, ducts, ladder systems, suspended mesh ceilings. – Not compatible with Cisco Meraki. Mechanics & Dimensions – Mounting principle: hook the mount into place, then tighten using wing screws. – Installation orientation: horizontal (AP is hooked into the mount). Material & Finish – 1 mm zinc-plated steel, powder-coated; standard color white (RAL 9010). – Other colors available on request after consultation. These material and color specifications match our other mounts and ensure a consistent appearance. Installation & Use – Fast installation by hooking in and securing with wing screws—ideal for retrofit and industrial environments. – Application: indoor use – No drilling required, resulting in a minimal impact on existing ceiling/tray systems. Advantages at a Glance Drill-free installation – hook in & secure with wing screws reduces effort and installation time Industrial-grade – suitable for grid ceilings, cable trays/ducts/ladders and mesh ceilings Clean horizontal installation – AP is hooked into the mount Durable powder-coated surface – scratch- and impact-resistant; standard color RAL 9010 Broad Cisco compatibility – supports numerous AP series Technical Overview Feature Description Product Industrial Ceiling Mount for Cisco Access Points Version 3 (CM-IND-C-3) Category / Purpose Mount for fast, drill-free horizontal installation on industrial/grid ceilings, cable trays, ducts, ladders, suspended mesh ceilings Compatibility Cisco series: from AP1040 (approx. 2009) Mounting principle Hook in the mount, secure using wing screws; AP is hooked in Adjustment Fixed position (no adjustable range after tightening) Material / finish Fully powder-coated, scratch- and impact-resistant; standard: white (RAL 9010); other colors on request Installation Drill-free; suitable for industrial/grid ceilings, cable trays, mesh ceilings Scope of delivery 1× mount (CM-IND-C-3), 2× M5 wing screw; APs not included Use case Indoor Conclusion The Industrial Ceiling Mount V3 for Cisco Access Points is the fast, drill-free solution for horizontal installation of Cisco Access Points on common industrial structures. Thanks to its hook-in design and wing-screw fixation, installation is quick and secure; the robust RAL 9010 powder coating ensures long-lasting durability. Its broad compatibility with widely used Cisco AP series makes the mount highly versatile across projects. Scope of Delivery – 1× Mount (CM-IND-C-3) – 2× M5 wing screw – Access Points shown are not included. Downloads Datenblatt (DE)   datasheet (EN)

Made in Hamburg/Germany The Industrial Ceiling Mount V3 for Juniper Mist Access Points enables fast, low-tool and drill-free installation of Juniper Mist Access Points on industrial & grid ceilings, cable trays, ducts, ladder systems as well as suspended wire-mesh ceilings. The mount is simply hooked in place and secured with wing screws—the access point is then hooked into the mount and operated horizontally. This reduces installation effort and time significantly in industrial environments. Details Compatibility – Supported Juniper Mist AP models: AP45, AP43, AP41, AP34 as well as newer generations – Mounting targets: industrial & grid ceilings, cable trays, ducts, ladder systems, suspended mesh ceilings and similar structures Mechanics & Dimensions – Mounting principle: hook in the mount and then tighten using wing screws. – Installation orientation: horizontal (AP is hooked into the mount). – Drilling: not required. Material & Finish – 1 mm zinc-plated steel, powder-coated; standard color white (RAL 9010). – Other colors available on request after consultation. These material and color specifications match our other indoor mounts and ensure a consistent visual appearance. Installation & Use – Fast installation by hooking in and securing with wing screws—ideal for retrofit and industrial environments. – Application: indoor use – No drilling required; resulting in minimal impact on existing ceiling/tray systems. Advantages at a Glance Drill-free installation – hook in & secure with wing screws reduces effort and installation time Industrial-grade – suitable for grid ceilings, cable trays/ducts/ladders and mesh ceilings Clean horizontal installation – AP is hooked into the mount Durable powder coating – scratch- and impact-resistant; standard color RAL 9010 Wide Juniper Mist compatibility – supports numerous AP models Technical Overview Feature Description Product Industrial Ceiling Mount Version 3 for Juniper Mist Access Points (CM-IND-JM-3) Category / Purpose Mount for fast, drill-free horizontal installation on industrial/grid ceilings, cable trays, ducts, ladder systems, suspended mesh ceilings Compatibility Juniper Mist: AP45, AP43, AP41, AP34 Mounting principle Hook in the mount, secure using wing screws; AP is hooked in Material / finish Fully powder-coated, scratch- & impact-resistant; standard: white (RAL 9010); other colors on request Installation Drill-free; suitable for industrial/grid ceilings, cable trays and mesh ceilings Scope of delivery 1× mount (CM-IND-JM-3), 2× M5 wing screw; APs not included Use case Indoor Conclusion The Industrial Ceiling Mount is the fast, drill-free solution for horizontal installation of Juniper Mist Access Points on typical industrial structures. Thanks to its hook-in design and wing-screw fixation, installation is quick and secure; the robust RAL 9010 powder coating ensures long-lasting durability. Its broad compatibility with widely used Juniper Mist AP models makes the mount highly versatile across projects. Scope of Delivery – 1× Mount (CM-IND-JM-3) – 2× M5 wing screw – Access Points shown are not included. Downloads Datenblatt (DE)   datasheet (EN)

Made in Hamburg/Germany The Industrial Ceiling Mount Version 3 for Aruba Access Points enables fast, low-tool and drill-free installation of Aruba Access Points on industrial & grid ceilings, cable trays, ducts, ladders as well as suspended wire-mesh ceilings. The mount is simply hooked in place and secured with wing screws—the access point is then hooked into the mount and operated horizontally. This significantly reduces installation time and effort in industrial environments. Details Compatibility – Supported Aruba AP series: 500 series, 600 series, 700 series – Mounting targets: industrial & grid ceilings, cable trays, ducts, ladder systems, suspended mesh ceilings, and similar structures Mechanics & Dimensions – Mounting principle: hook in the mount, then secure using wing screws. – Installation orientation: horizontal (AP is hooked into the mount). – Drilling: not required. Material & Finish – 1 mm zinc-plated steel, powder-coated; standard color white (RAL 9010). – Other colors available on request after consultation. These material and color specifications match our other indoor mounts to ensure a uniform appearance. Installation & Use – Fast installation by hooking in and securing with wing screws—ideal for retrofits and industrial environments. – Application: indoor use – No drilling required; therefore minimal impact on existing ceiling/tray structures. Advantages at a Glance Drill-free installation – hook in & secure with wing screws, reducing effort and installation time Industrial-grade – suitable for grid ceilings, cable trays/ducts/ladders and mesh ceilings Clean horizontal installation – AP is hooked into the mount Durable powder coating – scratch- and impact-resistant; standard color RAL 9010 Wide Aruba compatibility – supports multiple AP series Technical Overview Feature Description Product Industrial Ceiling Mount Version 3 for Aruba Access Points (CM-IND-A-3) Category / Purpose Mount for fast, drill-free horizontal installation on industrial/grid ceilings, cable trays, ducts, ladders, suspended mesh ceilings Compatibility 500 series, 600 series, 700 series Mounting principle Hook in the mount, secure with wing screws; hook in AP Material / finish Fully powder-coated, scratch- & impact-resistant; standard: white (RAL 9010); other colors on request Installation Drill-free; suitable for industrial/grid ceilings, cable trays and mesh ceilings Scope of delivery 1× mount (CM-IND-A-3), 2× M5 wing screw; APs not included Use case Indoor use Conclusion The Industrial Ceiling Mount Version 3 is the fast, drill-free solution for horizontal installation of Aruba Access Points on common industrial infrastructures. Thanks to its hook-in principle and wing-screw fixing, installation is quick and secure; the durable RAL 9010 powder coating ensures long-term robustness. Its broad compatibility with popular Aruba AP series makes this mount highly versatile across projects. Scope of Delivery – 1× Mount (CM-IND-A-3) – 2× M5 wing screw – Access Points shown are not included. Downloads Datenblatt (DE)   datasheet (EN)

Made in Hamburg/Germany The Industrial Ceiling Mount Version 2 for Aruba Access Points enables fast, low-tool and drill-free installation of Aruba Access Points on industrial & grid ceilings, cable trays, ducts, ladders as well as suspended wire-mesh ceilings. The mount is simply hooked into place and secured with wing screws—the access point is then hooked into the mount and operated horizontally. This reduces installation effort and time in industrial environments. Details Compatibility – Supported Aruba AP series: 500 series, 600 series, 700 series – Mounting targets: industrial & grid ceilings, cable trays, ducts, ladder systems, suspended mesh ceilings and similar structures Mechanics & Dimensions – Mounting principle: hook in the mount, then tighten using wing screws. – Installation orientation: horizontal (AP is hooked into the mount). – Drilling: not required. Material & Finish – 1 mm zinc-plated steel, powder-coated; standard color white (RAL 9010). – Other colors available on request after consultation. These material and color specifications match our other indoor mounts and ensure a uniform appearance. Installation & Use – Fast installation by hooking in and securing with wing screws—ideal for retrofit and industrial environments. – Application: indoor use – No drilling required—resulting in minimal impact on existing ceiling/tray systems. Advantages at a Glance Drill-free installation – hook in & secure with wing screws reduces effort and installation time Industrial-grade – suitable for grid ceilings, cable trays/ducts/ladders and mesh ceilings Clean horizontal installation – AP is hooked into the mount Durable surface – powder coating is scratch- and impact-resistant; standard color RAL 9010 Wide Aruba compatibility – supports multiple AP series Technical Overview Feature Description Product Industrial Ceiling Mount Version 2 for Aruba Access Points (CM-IND-A-2) Category / Purpose Mount for fast, drill-free horizontal installation on industrial/grid ceilings, cable trays, ducts, ladder systems, suspended mesh ceilings Compatibility 500 series, 600 series, 700 series Mounting principle Hook in the mount, secure using wing screws; AP is hooked in Material / finish Fully powder-coated, scratch- and impact-resistant; standard: white (RAL 9010); other colors on request Installation Drill-free; suitable for industrial/grid ceilings, cable trays and mesh ceilings Scope of delivery 1× mount (CM-IND-A-2), 2× M5 wing screw; APs not included Use case Indoor Conclusion The Industrial Ceiling Mount Version 2 is the fast, drill-free solution for horizontal installation of Aruba Access Points on common industrial structures. The hook-in mounting principle and wing-screw fixation make installation quick and secure; the robust RAL 9010 powder coating ensures long-lasting durability. Its broad compatibility with popular Aruba AP series makes the mount highly versatile for project work. Scope of Delivery – 1× mount (CM-IND-A-2) – 2× M5 wing screw – Access Points shown are not included.